Cobalt Digital OBSIDIAN 3G 9501-DCDA-3G Downconverter - Manual (Page 29)

9501DCDA-OM (V1.3) 9501-DCDA PRODUCT MANUAL 3-1
Chapter 3
Chapter 3
Operating Instructions
Overview
This chapter contains the following information:
• Control and Display Descriptions (p. 3-1)
• Accessing the 9501-DCDA Card via Remote Control (p. 3-5)
• Checking 9501-DCDA Card Information (p. 3-7)
• Ancillary Data Line Number Locations and Ranges (p. 3-8)
• 9501-DCDA Function Submenu List and Descriptions (p. 3-9)
• Troubleshooting (p. 3-28)
Control and Display Descriptions
This section describes the user interface controls, indicators, and displays for
using the 9501-DCDA card. The 9501-DCDA functions can be accessed and
controlled using any of the user interfaces described here.
The format in which the 9501-DCDA functional controls, indicators, and
displays appear and are used varies depending on the user interface being
used. Regardless of the user interface being used, access to the 9501-DCDA
functions (and the controls, indicators, and displays related to a particular
function) follows a general arrangement of Function Submenus under which
related controls can be accessed (as described in Function Submenu/
Parameter Submenu Overview below).
Note: When a setting is changed, settings displayed on DashBoard™ (or a Remote
Control Panel) are the settings as effected by the card itself and reported back
to the remote control; the value displayed at any time is the actual value as set
on the card.
If you are already familiar
with using DashBoard or a
Cobalt Remote Control
Panel to control Cobalt
cards, please skip to
9501-DCDA Function
Submenu List and
Descriptions (p. 3-9).