PowerWalker SNMP DP-522 - Manual (Page 8)

Section2. Applications
2.1 NetAgent makes your UPS on the Internet
When the UPS connects with NetAgent, the system manager could check
each and every UPS condition by a computer with Browser installed. The
manager could monitor and control the UPS by simply input the IP address of
the NetAgent which connects to the UPS. When there is a power abnormal
condition happens, the NetAgent could also send the trap information to the
system manager to take proper action.
2.2 NetAgent Provides Shutdown Utilities
When a computer on the network with the NetAgent utility installed, it could
locate all the NetAgent on the network. When the UPS of this NetAgent is in
AC failure condition or Battery Low condition, the operating system could close
all the files on the system, and perform a gracefully shutdown. This could avoid
system corrupt when a power disconnection happened.
2.3 NetAgent II for Surrounding Monitoring
3Port NetAgent II could be use to connect the surrounding monitoring utility,
NetFeeler II, to get the temperature/humidity/smoke/fire signals. These
informations could also be revealed on the NetAgent Web page. When there is
an abnormal condition happened, it could also be sent as a trap to the system
manager.
2.4 When we need the NetAgent?
n When we need to remote monitoring and controls the UPS conditions. For
example, the system manager could use the Internet to control all the UPS
conditions all over the country. When the shutdown utility is installed, the
shutdown utility could close all the files and shutdown the system when a
power abnormal condition happened.
o When we need to monitor surrounding conditions of the machine room,
warehouse, office, …etc. For example, the system manager could know the
temperature, humidity, smoke and water condition by using the NetAgent II-
3Ports version and NetFeeler II. The system manager could always know
these surrounding conditions by using a Web browser.
2