PowerWalker SNMP DP-522 User Manual
Page 92
3.
Use IE browser to update (suitable for BK,CK,DK,BP,CP,DP version)
This method is to enter the account, password and IP address of the NetAgent UPS which the
user wish to update under the website column. Once entered, user may see the current firmware
version, and then please copy the latest firmware to here to complete the updating process.
Two method of entering:
(1) ftp://admin:password@192.168.50.179
Again, the password here is the one been set at Netility, if did not set anything before, then
enter NetAgent’s default value as:
Account: admin
Neglect password (ftp://admin:@192.168.50.179)
(2) ftp://192.168.50.179/ , when using this method to enter, the follow error message will be
show. At this moment, select “Enter Identity” at the top left corner of file menu. Then enter
admin as account name and password to re-enter again.
Once the connection been established, the following window will be display. Then the user may
transfer the latest firmware to here for the replacement in order to complete the updating steps.
86