PowerWalker VFI 6000T LCD - Manual (Page 38)

35
Example: clear EPO status
Clear EPO status
By press <1s
Status:EPO active
Clear:no
Status:EPO active
Clear:yes
By press or <1s
Status:EPO inactive
Clear:no
By press >1s
Note: First make sure the EPO signal is inactive or the LCD will show
below information and the EPO active status couldn’t be cleared.
Fig. 5-19 clear EPO status
5.4.6 The identification menu
By press on the menu of “Identification”, the display would enter
the next identification menu tree.
The identification information includes UPS serial number, firmware
serial number, model type, would be shown here.
By press >1s, the display would return the last main menu tree.