QTECH QSW-8300 Инструкция по настройке - Manual (Page 101)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
100
no policy-map <policy-map-name> mode; the no command deletes the
specified policy map.
class <class-map-name> [insert-before <class-
map-name>]
no class <class-map-name>
After a policy map is created, it can be
associated to a class. Different policy or
new DSCP value can be applied to
different data streams in class mode; the
no command deletes the specified class.
set internal priority <new-intp>
no set internal priority
Assign a new internal priority for the
classified traffic; the no command cancels
the new assigned value.
Single bucket mode:
policy <bits_per_second>
<normal_burst_bytes> ({exceed-action
ACTION} )
Dual bucket mode:
policy <bits_per_second>
<normal_burst_bytes> [pir <peak_rate_bps>] |
<maximum_burst_bytes> [{exceed-action
ACTION | violate-action ACTION }]
ACTION definition:
drop | transmit | set-internal-priority
<intp_value> | policied-intp-transmit
no policy
Configure a policy for the classified flow.
The non-aggregation policy command
supports three colors. Analyze the
working mode of the token bucket,
whether it is singe rate single bucket,
single rate dual bucket, dual rate dual
bucket, set corresponding action to
different color packets. The no command
will delete the mode configuration.
policy aggregate <aggregate-policy-name>
no policy aggregate
Apply a policy to classified traffic; the no
command deletes the specified policy set.
accounting
no accounting
Set statistic function for the classified
traffic. After enable this function under the
policy class map mode, add statistic
function to the traffic of the policy class
map. In single bucket mode, the
messages can only red or green when
passing policy. In the print information,
there are two colors(green and red) of the
packets. In dual bucket mode, there are
three colors(green, red and yellow) of the
packets.
Policy class map configuration mode
drop
no drop
Drop or transmit the traffic that match the
class, the no command cancels the