QTECH QSW-8300 Инструкция по настройке - Manual (Page 189)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
188
select delimiter
ipv6 dhcp snooping subscriber-id select
(sp|sv|pv|spv) delimiter WORD (delimiter
WORD |)
no ipv6 dhcp snooping subscriber-id
select delimiter
Configures user configuration options to
generate subscriber-id. The no command
restores to its original default configuration,
i.e. vlan name together with port name.
Port mode
ipv6 dhcp snooping remote-id <remote-id>
no ipv6 dhcp snooping remote-id
This command is used to set the form of
adding option 37 in received DHCPv6 request
packets, of which <remote-id> is the content
of remote-id in user-defined option 37 and it is
a string with a length of less than 128. The no
operation restores remote-id in option 37 to
enterprise-number together with vlan MAC
address.
ipv6 dhcp snooping subscriber-id
<subscriber-id>
no ipv6 dhcp snooping subscriber-id
This command is used to set the form of
adding option 38 in received DHCPv6 request
packets, of which <subscriber-id> is the
content of subscriber-id in user-defined option
38 and it is a string with a length of less than
128. The no operation restores subscriber-id
in option 38 to vlan name together with port
name such as "Vlan2+Ethernet1/0/2".
2. DHCPv6 relay option basic functions configuration
Command Description
Global mode
ipv6 dhcp relay remote-id option
no ipv6 dhcp relay remote-id option
This command enables the switch relay to
support option 37 and the no form of this
command disables it.
ipv6 dhcp relay subscriber-id option
no ipv6 dhcp relay subscriber-id option
This command enables the switch relay to
support the option 38, the no form of this
command disables it.
ipv6 dhcp relay remote-id delimiter WORD
no ipv6 dhcp relay remote-id delimiter
Configures user configuration options to
generate remote-id. The no command
restores to its original default configuration,
i.e. enterprise number together with vlan
MAC.