QTECH QSW-3400 Инструкция по настройке - Manual (Page 462)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
461
2. Globally set the max output power
3. Globally set the power management mode
4. Globally set non-standard PD detection mode
5. Globally enable or disable the allowed high-inrush current when nonstandard PD is
powered instantaneously
6. Enable or disable PoE on specified ports
Command Explanation
Global Mode
power inline max <max-wattage>
no power inline max
Globally set the max output power of PoE.
Command Explanation
Global Mode
power inline police enable
no power inline police enable
Enable/disable the power priority
management policy mode. Disable the
power priority management policy mode is
not supported by switch.
Command Explanation
Global Mode
power inline legacy enable
no power inline legacy enable
Set whether or not to provide power for non-
standard IEEE PD. Do not provide power for
non-standard IEEE PD in switch.
Command Explanation
Global Mode
power inline high-inrush enable
no power inline high-inrush enable
Enable/disable the allowed high-inrush
current when nonstandard PD is powered
instantaneously.
Command Explanation
Port Mode
power inline enable Enable/ disable PoE.