QTECH QSW-3400 Инструкция по настройке - Manual (Page 54)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
53
(2) Configure TFTP server connection idle time
(3) Configure retransmission times before timeout for packets without acknowledgement
(4) Shut down TFTP server
1. FTP/TFTP client configuration
(1) FTP/TFTP client upload/download file
Command Explanation
Admin Mode
copy <source-url> <destination-url> [ascii
| binary]
FTP/TFTP client upload/download file.
(2) For FTP client, server file list can be checked.
Admin Mode
ftp-dir <ftpServerUrl> For FTP client, server file list can be checked.
FtpServerUrl format looks like: ftp: //user:
password@IPv4|IPv6 Address.
2. FTP server configuration
(1) Start FTP server
Command Explanation
Global Mode
ftp-server enable
no ftp-server enable
Start FTP server, the no command shuts down FTP
server and prevents FTP user from logging in.
(2) Configure FTP login username and password
Command Explanation
Global Mode
ip ftp username <username>
password [0 | 7] <password>
no ip ftp username<username>
Configure FTP login username and password; this no
command will delete the username and password.
(3) Modify FTP server connection idle time
Command Explanation
Global Mode
ftp-server timeout <seconds> Set connection idle time.
3. TFTP server configuration
(1) Start TFTP server