SENA Parani100 - Manual (Page 10)

- 10 - 10
(1) DIP Switch
Users may select several different methods of data communication with the Host.
Default setting is TCP/IP communication using no.4 RJ45 marked EXT, but if users
need, data communication by no.3 RS232 Interface marked “IOIOI” is also
possible.
•
If DIP switch is on the side of drawing , Parani100 communicates with Host
via Ethernet line (TCP/IP).
•
If users want to use RS232 com. please change the direction of switch in the
opposite direction.
(2) Power Port: For Power Adapter connection
(3) RS232 Interface marked “IOIOI”:
For Parani100 network configuration via RS232 serial cable - One RS232 serial
cable, both ends female DB-9 interfaces, are provided with the Parani100.
This port can be used for both Configuration of Parani100 and Data communication
with Host.
(4) RJ45 marked EXT.: For connection to Host or HUB devices. For connection to PC,
use a Crossed cable ; for connection to HUB, use Straight
Ethernet cable.
(5) RJ45 marked INT.: Hub port for connection to another Parani100. With this,
Parani100s can be chained without network hub. This is forthe
better user experience of convenient installation. Use a straight
cable for this purpose.
2.2 LED Indicators
- POWER: POWER ON/OFF Status
- STATUS: Parani100 Status
- ERROR: Error Event Status
- LINE/ACT1, LINE/ACT2: RJ45 connections Status