A .2 commands for server mode – SENA Parani100 User Manual
Page 51
- 51 -
51
not possible. Before changing the MODE, please drop all of Bluetooth
connections first.
Ex.:
MODE
+OK Server Mode
MODE CLIENT
+OK Client Mode
A .2 Commands for Server Mode
PORT [port no.]
:
To configure default PORT number of Server Mode Parani100.
If a Bluetooth terminal, which is not pre-registered by Parani100 software
(BIND command), port numbers will be assigned automatically by
Parani100. Users may check the PORT numbers used by LIST command.
Ex.:
PORT
+OK PORT 5000
PORT 6000
+OK PORT 6000
BIND <bdaddr|name> <port>
:
A static Port no. may be assigned to a designated Bluetooth device via
BIND command. A BD address is optional to a user-friendly named.
Response:
+OK index|name|bdaddr|port
Ex.:
BIND 00:0B:53:00:00:01 8000
+OK
BIND Parani10 8001
+OK
BIND
0||00:0B:53:00:00:01|8000
1|Parani10||8000
+OK
RELE <port no.>
:
If users do not need to use a bound port number, RELE command can be
used to release the port number.
Ex.:
RELE 8000
+OK