SENA Parani100 - Manual (Page 25)

- 25 - 25
•
Operation Mode
This shows current type of Mode.
•
Mode Change
Users may change and select the type of Operation.
•
Search
Users may search Parani100 on the network.
A) Server Mode
In Sever Mode, Parani100 will operate as a Server on the network. Host PC will connect
to Parani100 via TCP/IP Ethernet and Parani100 will recieve the connection. After
connection, full duplexing is possible.
Users need to select the Port number to standby to receive connection from Host PC.
<Configuration of Server Mode>
Note: While Bluetooth devices are connected to Parani100,
mode change is not possible.