A .7 commands for bluetooth connection management – SENA Parani100 User Manual
Page 57
- 57 -
57
A .7 Commands for Bluetooth Connection Management
LIST
:
To see connected Bluetooth device list
Response:
idx|dev_id|port|bdaddr|name|tx_byte|rx_byte
Ex.:
LIST
0|0|5000|00:0B:53:00:00:8A|SDv3b-00008A|0|0
+OK
CONN <bdaddr> [channel]
:
Parani100 may try to CONNECT to Bluetooth terminals. If you specify a
channel, Parani100 will try connection directly without SDP (Service
Discovery Protocol) process.
Each terminal should be in discoverable/ connectable mode.
Ex.:
CONN 00:0B:53:00:00:8A
+OK
DISC <idx>
:
Parani100 may DISCONNECT forcibly by DISC command, giving INDEX
value in LIST command.
Ex.:
LIST
0|0|5000|00:0B:53:00:00:8A|SDv3b-00008A|0|0
+OK
DISC 0
+OK
LIST
+OK
LINKTO <timeout>
:
When a Bluetooth terminal is disconnected by turning off its power,
Parani100 has default time out of 20 seconds in finally disconnecting the
connection. You may assign the time out from 1 second up to 30 seconds.
Ex.:
LINKTO 20
+OK
MAXDT <number of max. connections>