SENA ProBee-ZE20S - Manual (Page 91)

91 ProBee-ZE20S User Guide Rev.1.10
device to poll more rapidly for a short time when receiving RF data.
Execute ATS56?<CR> ATS56=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR>
Default 5
Range 0 - 10000
9.6 Sink
9.6.1 S61
Description
Get/Set the sink node and the sink advertise period in seconds. When a node is
defined as a sink, it can multicast its address to the rest of the network in this period. If
set to 0, sink advertise is disabled.
Execute ATS61?<CR> ATS61=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR>
Default 0
Range 0 – 10000
9.6.2 S62
Description
Get/Set the period to send Many-to-One Route Request. Many-to-One Route Request
(MTOR) creates routes from every node in the network back to this node. It is useful
when this node acts as a sink node.
Execute ATS62?<CR> ATS62=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR>
Default 0
Range 0 – 10000
9.7 Frequency Agility
9.7.1 S71
Description
Get/Set the Frequency agility function. If it is enabled in coordinator mode, node will
automatically shift operating channel to one of channel masks when its unicasts fail
more than threshold.
Execute ATS71?<CR> ATS71=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR>
Default 0
Range 0 – 1