GE Industrial Solutions THAUXDT Auxiliary switch kit - Manual

g
DEH44152 Installation Instructions
Auxiliary switch kit
Catalog number – THAUXDT
Introduction
1
This bulletin provides instructions for
installing Auxiliary switch kit – THAUXDT
on all GE Double throw safety switch.
WARNING: Hazard of electrical shock or
burn. Turn off power before working
inside this equipment.
Description
This neutral kit consists of the following
parts:
1. Two (2) Auxiliary switch assembly
2. Four (4) 6-32 X 1” mounting screws
Mounting Instruction
1. Remove nuts provided in auxiliary
switch assembly & dispose them. Refer
Fig 1.
2. Install Auxiliary switch assembly on
bracket attached to side wall using
mounting screws in the orientation
shown. Refer Fig 2.
Fig 1
g
General Electric Company
41 Woodford Ave., Plainville, CT. 06062
DEH44152 R01 08/07 © 2007 General Electric
Visit us on the web at www.GEindustrial.com
These instructions do not purport to cover all details or variations in equipment nor to provide
for every possible contingency to be met in connection with installation operation or
maintenance. Should further information be desired or should particular problems arise which
are not covered sufficiently for the purchaser’s purposes, the matter should be referred to the GE
Company.
GE Consumer & Industrial
Fig 2 (Door not shown)