GE Industrial Solutions EntelliGuard R AKD-8 - Manual (Page 12)

11 EntelliGuard R Circuit Breaker Retrofill AKD-8 Installation Manual DEH-41549 02/12
Figure 5. AKD-8—Circuit Breaker Compartment (22-Inch) for AKR-30/50/T50 Breakers
Unpack CB
• Turn off all power to switchgear. Tagout
and lockout main source, up-stream or main
breaker.
• Failure to comply with these instructions
will result in death or serious injury from
severe burns caused by arc flashing that has
exceedingly high temperatures.
• Always wear personal protection equipment
according to OSHA standards and
appropriate to the severity of potential
burns.
• Ensure only qualified personnel install, operate, service, and maintain all electrical
equipment.