GE Industrial Solutions MicroVersaTrip Plus and MicroVersaTrip PM AK-1-15, AK-1-25 - Manual

INTRODUCTION
GE Conversion Kits are designed for upgrading
existing I-T-E®/ABB®
low-voltage power circuit
breakers, rather than replacing the entire breaker.
The Conversion Kits include MicroVersaTrip Plus™
or MicroVersaTrip PM™ Trip Units, the latest tech-
nological advance in GE trip systems.
MicroVersaTrip Plus and MicroVersaTrip PM Conver-
sion Kits are designed and tested to conform to ANSI
Standard C37.59, allowing the retrofitter to properly
install the kit and acceptance test the breaker.
This publication covers installation of
MicroVersaTrip Plus and MicroVersaTrip PM Con-
version Kits on I-T-E/ABB Types K-3000, K-3000S, K-
4000, and K-4000S low-voltage power circuit break-
ers. Each Conversion Kit contains all the components
needed to convert from the existing trip system.
g
MicroVersaTrip Plus™ and
MicroVersaTrip PM™ Conversion Kits
for I-T-E ® /ABB ® Types K-3000, K-3000S, K-
4000,
and K-4000S Low-Voltage Power Circuit
Breakers
DEH–133B Installation Instructions