GE Industrial Solutions Micro-BDCBB - Manual (Page 17)

J85568E-1 Secondary DC Mini-Distribution Bay
Issue 6 January 2008 Ordering Information 3 - 1
3 Ordering Information
List Structure
Table 3-A describes the list structure of the J85568E-1
Mini-Distribution Bay. List 2 provides the assembly with four
empty panel positions. Panel positions 1 and 3 must be equipped
with a fuse or circuit breaker panel to support bus bars. Panel
positions 2 and 4 must be equipped with either a List C fuse
panel, a List D circuit breaker panel or a List B blank panel.
If a relay rack is required, order List A and the factory will install
the Mini-Distribution Bay in a ED8C800-50 framework, as
shown in Figure 2-2.
Table 3-A: J85568E-1 Mini-Distribution Bay Ordering
Information
Description List
Assembly, wiring, and equipment for one 33-inch
-48V battery distribution unit for mounting in a
23-inch relay rack. Provides one meter and alarm
termination panel and space for four fuse or circuit
breaker panels in a two-load (A/B) arrangement.
Optional equipment in addition to List 2 for a
23-inch relay rack mounted in a ED8C800-50 G5
framework (soft blue finish).
Optional equipment in addition to List 2 for a blank
panel for panel positions two or four.
Optional equipment in addition to List 2 for a fuse
panel equipped with 12 fuse blocks for 3-60A fuses.
Optional equipment in addition to List 2 for a circuit
breaker panel to hold up to 12 circuit breakers.
2
A
B
C
D