GE Industrial Solutions Micro-BDCBB - Manual (Page 26)

J85568E-1 Secondary DC Mini-Distribution Bay
4 - 4 Safety Issue 6 January 2008
One of these two symbols (or equivalent)
may be used to identify the presence of
rectifier and battery voltages. The symbol
may sometimes be accompanied by some
type of statement, for example: “Battery
voltage present. Risk of injury due to high
current. Avoid contacting conductors with
uninsulated metal objects. Follow safety
precautions.”
This symbol is used to identify the
presence of a hot surface. It may also be
accompanied by a statement explaining
the hazard. A symbol like this with a
lightning bolt through the hand also
means that the part is or could be at
hazardous voltage levels.
This symbol is used to identify the
presence of a hot surface. The marked
item should not be touched without taking
care.
This symbol is used to identify the
protective safety earth ground for the
equipment.
This symbol is used to identify other
bonding points within the equipment.