Tvrms2 digital test kit chapter 1. introduction, 1–3 definition of terms, 1–4 test selection – GE Industrial Solutions TVRMS2 Digital Test Kit User Manual

Page 8

Advertising
background image

TVRMS2 Digital Test Kit
Chapter 1. Introduction

2

1–3 Definition of Terms

The terms listed and defined in Table 2 are displayed on
the Test Kit and are used throughout this guide.

Term

Definition

S,

xCT

The current sensor rating – the primary

current rating of the breaker’s current sensors.

X,

xIn

The current rating of the Trip Unit, set by the

rating plug.

C,

xLT

The current setting of the Trip Unit –

determined as a multiplier of the rating plug

value.

LT

Long Time overcurrent protection function

ST

Short Time overcurrent protection function

INST

Instantaneous overcurrent protection function

GF

Ground Fault overcurrent protection function

H

The Short Time rating of the breaker frame.

Trip Test

A test that causes the breaker to trip.

No-Trip

Test

A test that does not cause the breaker to trip.

Table 2. Definitions of terms used in this guide.

1–4 Test Selection

The Test Kit can perform three types of tests on Trip
Units:

Function tests verify the operation of the Trip Unit,

including:

– Time-overcurrent tests, both trip and no-trip
– Switch-setting verification (Power+, RMS-9 and

Epic only)

– Trip Unit self-test report

High-current tests monitor the functioning of the Trip

Unit during primary current-injection testing of the
breaker with a separate, commercially available high-
current test set. Under high-current tests, the Test Kit
can temporarily suppress or defeat Ground Fault
protection. The Test Kit monitors the time at which
the Trip Unit goes into overcurrent pickup and
displays the overcurrent condition and the time
required to trip.

Quick test verifies that the Trip Unit and the breaker

mechanism can cause the breaker to trip by actually
tripping the breaker.

The tested functions are listed in Table 3.

Trip Unit

Flux Shifter

Test Selected

Function

Switches

A/D

Converter

Micro-

processor

(also ROM &

RAM)

Nonvolatile

Memory

Rating Plug

Trip Activator &

Breaker

Tripping

Mechanism

Input

Sensors

(CTs)

Switch Settings¿

X

X

X

X

X

Self-Test

X

X

X

Overcurrent

Simulation:

No Trip

Trip

X

X

X

X

X

X

X

X


X

Quick Test

X

X

High-Current

(Primary) Injection

X

X

X

X

X

X

X

¿ RMS-9, Power+, and Epic only.

Table 3. Tests available with the TVRMS2 Digital Test Kit and the functions tested.

Advertising