GE Industrial Solutions SG Series 750 T12 UL S2 User Manual - Manual (Page 35)

Modifications reserved Page 35/71
OPM_SGS_USM_M75_M75_2US_V010.doc User Manual SG Series 750 UL S2 & SG Series 750 T12 UL S2
Code Message Meaning
4699 BATTERY TEST IMPOSSIBLE
Automatic Battery Test is not possible due to:
−
No Utility Rectifier or Bypass.
− Battery not fully charged.
− Load is below 10% or above 80%.
Test is postponed for 1 week.
4763 REMOTE CONTROL ON
Inverter can be started or shutdown by remote control.
Commands source can be chosen depending on the value
of parameter (Service only):
0 = Only
Local Panel.
1 = Only Remote Control.
2 = Both.
4764 REMOTE CONTROL OFF
Inverter cannot be started or shutdown by remote control.
Commands source can be chosen depending on the value
of parameter (Service only):
0 = Only
Local Panel.
1 = Only Remote Control.
2 = Both.