GE Industrial Solutions ISM - Manual (Page 13)

Modifications reserved Page 13/34
OPM_ISM_OPT_10K_M50_0GB_V021.doc Operating Manual ISM – Intelligent Synchronization Module
4.2 DELIVERY
When delivered, check carefully the package integrity and the physical conditions of the ISM
equipment.
In case of any damage sustained during transport, immediately inform the carrier and contact your
local Service Centre.
A detailed report of the damage is necessary for any insurance claim.
NOTE !
A damaged ISM must never be installed or connected to power!
4.3 STORAGE
The equipment is carefully packed for transport
and storage so that it is in a perfect condition
when eventually installed.
Never leave an ISM outside the building and do
not store the ISM one on top of the other.
It is recommended to store the ISM in its original
package in a dry, dust free room and far away
from chemical substances, with temperature
not exceeding -25°C to 55°C (-13°F to 131°F).
Some important functions of the ISM are defined by parameters stored in a RAM memory.
The RAM is supplied by a small backup battery located on the Control Unit board.
If the storage time of the ISM exceeds 1 year, these functions should be verified by an authorised
Service Centre before putting the ISM into operation.
NOTE !
In case of storage of the ISM pay attention to:
FRAGILE
SENSITIVE
TO DAMPNESS TO HEAT
SENSITIVE
TO FROST
SENSITIVE