GE Industrial Solutions SG Series 100 – 120 – 150 kVA Operating Manual - Manual (Page 32)

Modifications reserved Page 32/82
OPM_SGS_USM_M10_M15_0US_V030.doc Operating Manual SG Series 100 – 120 - 150 kVA
3. Telephone numbers
Tel1:
Tel1 enabled: N
Tel2:
Tel2 enabled: N m e te rin g
a la rm s
p a ra m e te rs
+
–
o k
Tel1 This parameter specifies a first telephone number to be used for modem dial-out.
The telephone number has a maximum 39 characters and cannot contain blanks.
If the desired number is shorter than 39 characters, the string will finish with blanks.
Tel1 enabled This parameter Y/N specifies if the first telephone number will be used for dial-out.
Tel2 A second dial-out number.
Tel2 enabled This parameter Y/N specifies if the second telephone number will be used for dial-out.
Tel3 A third dial-out number.
Tel3 enabled This parameter Y/N specifies if the third telephone number will be used for dial-out.
Tel4 A fourth dial-out number.
Tel4 enabled This parameter Y/N specifies if the fourth telephone number will be used for dial-out.
4. LCD Display
LCD Display
UPS NAME: SG Series
Contrast = 9
Language = ENGLISH
m etering
alarm s
param eters
+
–
ok
UPS Name The user can choose the name of the UPS model shown on the main page (max. 7
characters).
LCD Contrast This parameter controls the contrast of the LCD screen in ten steps.
It can be adapted depending on the room lighting.
LCD Language This parameter allows the choice of language used to display the information.
Valid choices are English, German, Italian, Spanish, French, Finnish, Tschech, Slovak,
Polish and Portuguese.