GE Industrial Solutions GERAPID 8007R, 10007R WITH ARC CHUTES 1X2, 1X3 - Manual (Page 12)

Control box terminals (1) 12-pole AC 400 V, 20 A
(4) 15-pole AC 250 V, 8 A
Closing solenoid drive 1) Rated voltage AC 110 V - 240 V and DC 60 V - 250 V
Operating range 80 % - 115 % of rated voltage
Power consumption 60 Vdc drive 3000 W
Power consumption all other voltages 4500 W
Minimum command signal time 100 ms
Minimum interval between two closing operations ~8 s w/o NEKO installed; ~14 s with NEKO
Internal voltage converter 1) Input: Voltage range DC 33 - 85 V
Output: Voltage range DC 24 V (±5%)
Current 6 A continuous
Model description PCMD 150 48 S24W-GE
Input: Voltage range DC 88 - 145 V
Output: Voltage range DC 24 V (±5%)
Current 6 A continuous
Model description PCMD 150 110 S24W-GE
Input: Voltage range AC 115 - 240 V, DC 125 - 353 V
Output: Voltage range DC 24 V (±5%)
Current 3 A continuous, 5 A for 100 ms
Model description PCMA 70 S24W-GE or PCMAS 75 S24-GE
External power supply with plug and socket unit requires filtered DC 24 V (±5%)
Aux. contact HS 1…HS 10, Rated operational voltage Ue/AC 230 V
OC trip target (code 10) Rated operational current Ie/AC-15 1 A
Arc chutes indicator (code 17) Conventional thermal current Ie/AC-12 (Ith) 10 A
Rated operational voltage Ue/DC 110 V / 220 V
Rated operational current Ie/DC-13 0.5 A / 0.3 A
Minimum current/voltage ratings 0,1 mA / 6 V DC
Contact duty (min. value) DC 10 V / 2 mA
Shunt trip (a-release) Rated voltage/power Uc/Pc 24 V / 100 W
Operating range: OFF 21.6 V - 26.4 V
UVR (r-release) Rated voltage Uc 24 V
Zero voltage release Operating range: OFF < 4 V
Operating range: ON 24 V (±10%)
Power consumption ~ 10 W
ED impulse release Energie source: Capacity 2000 µF
Charging voltage 300 V
Switching interval max. 1/min with 10 consecutive operations
Endurance 1 000 operations with 1 operation per 180 s
Firing signal level / duration 6 - 24 V / 100 - 1000 ms
Charging signalization relay AC duty : AC 250 V/ 0.5 A - AC 120 V /1 A
DC duty : DC 220V/0.1A - DC 125V/0.3A - DC 10V/3A
1) Standard ambient conditions acc. to EN 50123-1 Attachement B. For meeting outside of this standard range, please contact GE.
Table 2a: Technical data of auxiliary circuits
Components Technical datas of control circuits
Us / In
Closing push-button -S1 (-X2 :4 / :5) DC 24 V / approx. 10 mA
ST releasing push-button-S2 (-X2 :6 / :7) DC 24 V / approx. 4 A
UVR releasing push-button -S2 ( -X2 :6 / :7) DC 24 V / approx. 10 mA
push-button -S2 ( -X2 :8 / :9 ) DC 24 V / approx. 450 mA
Impulse coil tripping w/o NEKO push-button -S3 (R=0.18 Ohm, Tau = 0.5ms) DC 300 V / ~1100 A / 3 ms
Impulse coil tripping with NEKO "firing signal" at ( -X2 :10 / :11 ) DC 6 V…24 V / approx.20 mA
Table 2b: Control circuits ( directional values to rate the components )
12 Design and specifications are subject to change without notice DTR01807 rev.02 2010-02-16