GE Industrial Solutions GERAPID 8007R, 10007R WITH ARC CHUTES 1X2, 1X3 - Manual (Page 27)

5.1 Safety distances and outlined dimensions.
Units call in mm and inches.
Type Arc chute Main-
Gerapid Connection A B C D A B C D
mm/in mm/in mm/in mm/in mm/in mm/in mm/in mm/in
8007R 1x2 all 600 / 23.6 530 / 20.9 530 / 20.9 190 / 7.5 600 / 23.6 280 / 11.0 280 / 11.0 190 / 7.5
1x3 all 600 / 23.6 530 / 20.9 530 / 20.9 190 / 7.5 600 / 23.6 280 / 11.0 280 / 11.0 190 / 7.5
10007R 1x2 all 600 / 23.6 530 / 20.9 530 / 20.9 190 / 7.5 600 / 23.6 280 / 11.0 280 / 11.0 190 / 7.5
Cubicle with blank grounded walls Cubicle with insulated walls
Legend for dimensional drawing
K Additional heat sinks for Gerapid 10007R
L All openings respectively free areas on the top of the cubical shall be not less than 50%
M Solenoid closing drive
P Diameter 9 mm [0,35 in], Countersunk screw M8
S Control box
Z Main connectors
*) Dimensions valid only for Gerapid 8007R version.
**) Dimensions valid only for Gerapid 10007R version.
***) Lifting eye fi 25 mm [ ~ 1 in]
Main terminals dimensions:
Type Connection
Gerapid version A B C D
mm/in mm/in mm/in mm/in
8007R R01 74 / 2.91 23 / 0.91 22 / 0.87 22 / 0.87
R02 50 / 1.97 41 / 1.61 27 / 1.06 36 / 1.42
10007R R01 74 / 2.91 23 / 0.91 22 / 0.87 22 / 0.87
R02 50 / 1.97 41 / 1.61 27 / 1.06 36 / 1.42
Dimensions on the drawing
2010-02-16 DTR01807 rev.02 Design and specifications are subject to change without notice 27