GE Industrial Solutions SG Series 50 & 80 kVA Operating Manual - Manual (Page 28)

Modifications reserved Page 28/82
OPM_SGS_USM_50K_80K_0US_V030.doc Operating Manual SG Series 50 & 80 kVA
6.4 EDIT MODE
The EDIT MODE is entered from the parameters mode when the ok button is pressed.
During this mode the LCD will display a special editing screen for the parameter being edited.
The screen contents during Edit mode is:
•
First line: the special operating mode.
• Second line: the name of the parameter being edited.
• Third line: the current value of the parameter.
• Fourth line: contains a condensed help text.
During the Edit mode the buttons perform the following functions:
metering Exits Edit mode and enters metering mode; any changes are discarded.
alarms Exits Edit mode and enters alarms mode; any changes are discarded.
parameters Exits Edit mode and enters parameters mode; any changes are discarded.
+ Scrolls from editable position to editable position.
– Changes the currently selected editable position.
ok Returns to parameters mode after saving the changes.
Examples of operation during Edit mode
There are three types of parameters they differ in behavior during Edit mode.
Depending the type of parameters, there are different ways to select and to change the needed values.
Type 1: Parameters having a large range of values (numeric value).
As continuation of the previous example, the telephone number stored in “Tel2” must be changed:
1 – Move the selection (block cursor) to the next character (+).
EDIT MODE
PHONE NUMBER 2
004017464340
+ SCROLL - CHANGE
metering
1
alarms
parameters
+
–
ok
2 – Move the selection to the next character (+).
EDIT MODE
PHONE NUMBER 2
004017464340
+ SCROLL - CHANGE
metering
2
alarms
parameters
+
–
ok