GE Industrial Solutions HE300GEN150 - Manual (Page 15)

PAGE 16 13 APR 2000 MAN0373-01
CH. 3
Table 3.1 – Parameter Settings
Option
Card
Parameter
Description Valid Input
Values
Default Value (o31 = 255)
o44 User Defined Broadcast Data 11 1-254
0;255*
255
o45 User Defined Broadcast Data 12 1-254
0;255*
255
o46 User Defined Control Data 1 1-254
0;255*
S06 Operation Command
o47 User Defined Control Data 2 1-254
0;255*
S01 Frequency Cmd
o48 User Defined Control Data 3 1-254
0;255*
S07 Universal Do
o49 User Defined Control Data 4 1-254
0;255*
S12 Universal Ao
o50 User Defined Control Data 5 1-254
0;255*
255
o51 User Defined Control Data 6 1-254
0;255*
255
o52 User Defined Control Data 7 1-254
0;255*
255
o53 User Defined Control Data 8 1-254
0;255*
255
o54 User Defined Control Data 9 1-254
0;255*
255
o55 User Defined Control Data 10 1-254
0;255*
255
Note: If the Option Card detects and invalid parameter value then the parameter number containing
the invalid value appears at o31 (Bus address). It is recommended that parameter o31 be checked
after the configuration is completed to make sure that all parameter values are valid.
* 0 and 255 are used to notate unused configuration parameter.
3.2.1 User Defined Parameters
The object of the user defined configuration parameters is to create a selectable data map for the Genius
data. There are 254 available parameters and only 12 broadcast and 10 control data words available on
the Genius network. The selectable map allows the user to configure what parameters and how many
are to be used.