GE Industrial Solutions IEMi - Manual (Page 20)

3.2.3 User parameters
NOTE !
Programming and activation of “IEMi Operation Mode” is not possible in the User
parameters section. However, such functionality is available via the 3-ph SNMP/Web
plug-in adapter option (if installed).
For more information please to refer to appropriate User Manual.
Pressing the parameters button displays a
series of screens containing the user
parameters on the LCD panel.
This first parameter level in not protected by
password, therefore the user can freely adapt
these parameters to their needs.
In this mode the buttons perform the following functions:
metering Scrolls forward to the next screen.
alarms Abandons the metering mode and enters the alarms mode.
parameters Abandons the metering mode and enters the parameters mode.
+ Scrolls forward to the next screen.
– Scrolls backward to the previous screen.
ok Displays the main screen for this mode.
Modifications reserved Page 20/24
OPM_OPT_IEM_iXX_XXX_XGB_V010.doc User Manual IEMi - Intelligent Energy Management integrated