GE Industrial Solutions EPM4500 Submeter - Manual (Page 41)

CHAPTER 3: USING THE METER RESETTING THE DEMAND VALUES
EPM 4500 SUB METER – INSTRUCTION MANUAL 3–7
3.4 Resetting the Demand Values
3.4.1 Procedure
Use the following procedure to reset the Demand registers to zero:
Z Press and hold the Demand Reset button.
• The LCD will initially display the
GE Copyright message.
• The LCD will then display the Dmdreset event screen:
Z Keep the Demand Reset button depressed until the screen updates
and displays the current date and time.
This signifies that the demand has been reset.
Dmdreset 1
20:00 06/14/2003