Net Optics iTap 10 GigaBit Port Aggregator - Manual (Page 33)

iTap 10 GigaBit Port Aggregator
29
The tables in the following sections explain the fields in Web Manager. To save
any changes to the iTap, click Submit Changes at the bottom of the page.
View System Status
Web Manager displays status information about the iTap Port Aggregator and its
ports. System Status UP indicates the iTap is functioning correctly. If the System
Status is DOWN, there is an internal error. For more information, contact Net Optics
Technical Support.
In addition to the System Status, you can view the status of each iTap port and
power supply as shown in the following figure.
Figure 13: iTap System, Link, and Power Status (top part of Web Manager page)
The following table describes the status fields.
Field Name Value Description
System Status UP/DOWN DOWN indicates an internal error; call Net
Optics Customer Service for assistance
System Model 10G 62.5um
SR Inline
Identifies the device model
Port A Link Status UP/DOWN Indicates the state of incoming traffic on Port A
Port B Link Status UP/DOWN Indicates the state of incoming traffic on Port B
Port 1 Link Status UP/DOWN Indicates the state of communication on Port 1
Port 2 Link Status UP/DOWN Indicates the state of communication on Port 2
Power Supply 1
Status
ON/OFF Indicates whether the iTap Port Aggregator is
receiving power from Power Supply 1
Power Supply 2
Status
ON/OFF Indicates whether the iTap Port Aggregator is
receiving power from Power Supply 2