Net Optics iTap 10 GigaBit Port Aggregator - Manual (Page 59)

iTap 10 GigaBit Port Aggregator
55
Command Sub-Command Syntax Description
Set
(continued)
Dropbad Port set dropbad port
<port ID>
<parameter>
Where <port ID> is A or B
and <parameter> is
1 = Drop packets with CRC
errors
2 = Pass packets with CRC
errors
(other values not applicable)
Note: Applies to CRC errors
as the packet is received at
the Monitor Port
Psize Port set psize port
<port ID>
<parameter>
Where <port ID> is A or B
and <parameter> is
64 to 12000
(other values not applicable)
Note: Sets the maximum
packet size; packets larger
than <psize> are discarded
and counted in the oversize
packet counter
Slice Port set slice port
<port ID>
<parameter>
Where <port ID> is 1 or 2
and <parameter> is
1 = Packet slicing on
2 = Packet slicing off
(other values not applicable)
Ssize Port set ssize port
<port ID>
<parameter>
Where <port ID> is 1 or 2
and <parameter> is
64 to 12000
(other values turn packet
slicing OFF)
Note: Sets the packet slicing
size; only <ssize> bytes are
passed when packet slicing
is enabled