Net Optics iTap 10 GigaBit Port Aggregator - Manual (Page 35)

iTap 10 GigaBit Port Aggregator
31
C
hange iTap Port Aggregator System Configuration
Web Manager has both read‑only and writable fields. Use the writable fields in
the Aggregator System Configuration section to set configuration parameters. To
change a parameter, type the new value into the field or select it from the list, and
then click Submit Changes at the bottom of the page to send the changes to the
iTap Port Aggregator device.
Note: ____________________________________________________________________
If you receive a message saying that your browser needs to resend the information
when you try to refresh your browser, return to the main Web Browser page by
re-entering the iTap Port Aggregator IP address in the browser's address bar.
Otherwise, you may not see current data when you refresh the browser. This
condition occurs only if you are looking at the "index.zhtml" page (for instance,
http://192.168.1.2/index.zhtml) that comes up after you Submit Changes.
__________________________________________________________________________
Figure 15: iTap Configuration (bottom part of Web Manager page)