Net Optics iTap 10 GigaBit Port Aggregator User Manual
Page 37
iTap 10 GigaBit Port Aggregator
33
Field Name
Description
Reset Port 1
Statistics
Select
Yes to zero all counters for Port 1.
Reset Port 2
Statistics
Select
Yes to zero all counters for Port 2.
Port 1 Mode
Select
AGG to set Port 1 to aggregation mode.
Select
TAP to set Port 1 to Tap mode.
Note: Both Monitor Ports must always be set to the same
mode or the device behavior will be undefined.
Port 2 Mode
Select
AGG to set Port 2 to aggregation mode.
Select
TAP to set Port 2 to Tap mode.
Note: Both Monitor Ports must always be set to the same
mode or the device behavior will be undefined.
Port 1 Regenerate
CRC
Select
ON to set Port 1 to append a regenerated CRC to
each packet.
Port 2 Regenerate
CRC
Select
ON to set Port 2 to append a regenerated CRC to
each packet.
Port A Timestamp
Select
ON to set Port A to timestamp packets.
Port B Timestamp
Select
ON to set Port B to timestamp packets.
Port A Drop Bad
Packet
Select
ON to set Port A to drop packets with CRC errors.
Port B Drop Bad
Packet
Select
ON to set Port B to drop packets with CRC errors.
Port A Maximum
Packet Size (Bytes)
Enter a value from 64 and 12000 to change the value of the
maximum packet size on Port A.
Port B Maximum
Packet Size (Bytes)
Enter a value from 64 and 12000 to change the value of the
maximum packet size on Port B.
Port A Packet Slicing Select
ON to set Port A to packet slice.
Port B Packet Slicing Select
ON to set Port B to packet slice.
Port A Sliced
Packet Size (Bytes)
Enter a value from 64 and 12000 to change the number of
bytes at which the packet received at Port A is sliced when
Port A packet slicing is ON.
Port B Sliced
Packet Size (Bytes)
Enter a value from 64 and 12000 to change the number of
bytes at which the packet received at Port B is sliced when
Port B packet slicing is ON.
Set Date and Time
Click this button the view or change the date and time of the
iTap Port Aggregator clock. This clock is used to record the
time of traffic utilization peaks.