Asus T4-M3N8200 - Manual (Page 69)

5-18 Chapter 5: BIOS setup
5.4.1 Jumperfree Configuration
The items in this menu allow you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
Configure System Frequency/Voltage
Processor Frequency Multiplier [Auto]
Processor Voltage [Auto]
AI Overclocking [Auto]
CPU/LDT Spread Spectrum [Enabled]
PCIE Spread Spectrum [Linear Down]
SATA Spread Spectrum [Linear Down]
PCI Spread Spectrum [Disabled]
iGPU Spread Spectrum [Disabled]
Configure System
Frequency and Voltage
Processor Frequency Multiplier [Auto]
Allows you to configure CPU Frequency.
Configuration options: [Auto] [x5.0 1000 MHz] [x5.5 1100 MHz] [Reserved] [x6.5
1300 MHz] [Reserved] [x 7.5 1500 MHz] [x8.0 1600 MHz] [x8.5 1700 MHz] [x9.0
1800 MHz] [x9.5 1900 MHz] [x10.0 2000 MHz] [x10.5 2100 MHz] [x11.0 2200 MHz]
[x11.5 2300 MHz] [x12.0 2400 MHz]
Processor Voltage [Auto]
Allows you to configure CPU voltage.
Configuration options: [Auto] [1.125 v] [1.150 v] [1.175 v] ...[1.475 v]
AI Overclocking [Auto]
Allows you to select the overclocking options to achieve the desired CPU internal
frequency. Select either one of the preset overclocking configiuration options.
Auto Loads the optimal settings for the system.
Manual Allows you to individually set overclocking parameters.
Standard Loads the standard settings for the system
The following items appear only when the AI Overclocking item is set to
[Manual].
CPU Frequency (MHz) [200.0]
Allows you to select the CPU frequency.
Configuration options: [200.0] [201.0]~[299.0] [500.0]
PCI-Express Frequency (MHz) [100]
Allows you to select the PCI-Express frequency.
Configuration options: [100] [101]~[107] [200]
The following items appear only when the AI Overclocking item is set to
[Manual] or [Standard]