Asus T4-M3N8200 - Manual (Page 77)

5-26 Chapter 5: BIOS setup
5.4.5 USB Configuration
The items in this menu allows you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to [Auto]
allows the system to detect the presence of USB devices at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed
(12 Mbps).
Configuration options: [FullSpeed ] [HiSpeed ]
BIOS EHCI Hand-Off [Enabled]
Enables or disables the BIOS EHCI hand-off feature.
Configuration options: [Disabled] [Enabled]
USB Configuration
Module Version - 2.24.3-13.4
USB Devices Enabled: None
None
USB Support [Auto]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
Options
Enabled
Disabled
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the USB Devices Enabled
item shows None.