Asus T4-M3N8200 - Manual (Page 81)

5-30 Chapter 5: BIOS setup
5.6 Boot menu
The Boot menu items allow you to change the system boot options. Select an item
then press <Enter> to display the sub-menu.
5.6.1 Boot Device Priority
1st ~ xxth Boot Device
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number
of devices installed in the system. Configuration options: [Removable Dev.] [Hard
Drive] [ATAPI CD-ROM] [Disabled]
Boot Device Priority
1st Boot Device [Removable Dev]
2nd Boot Device [Hard Drive]
3rd Boot Device [ATAPI CD-ROM]
5.6.2 Boot Settings Configuration
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive
B:) may appear when
you set the CD-ROM
drive as the first boot
device.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings Configuration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait For ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.