Asus T4-M3N8200 - Manual (Page 87)

5-36 Chapter 5: BIOS setup
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Tools
O.C. PROFILE Configuration
O.C. Profile 1 Status : Not Installed
O.C. Profile 2 Status : Not Installed
Save to Profile 1
Load from Profile 1
Save to Profile 2
Load from Profile 2
Start O.C. Profile
Save to Profile 1
5.7.4 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
Save to Profle 1/2
Allows you to save the current BIOS file to the BIOS Flash. Press <Enter> to save
the file.
Load from Profile 1/2
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press
<Enter> to load the file.
Start O.C. Profile
Allows you to run the utility to save and load CMOS. Press <Enter> to run the
utility.
ASUSTek O.C. Profile Utility V1.21
Current CMOS Restore CMOS
A:
Note
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
PATH: A:\
BOARD: M3N18L
VER: 0112 [H:02 B:03]
DATE: 12/14/2007
BOARD: Unknown
VER: Unknown
DATE: Unknown
• This function can support devices such as USB flash disk or floppy disk
with FAT 32/16 format only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
the system boot failure!