Asus T4-M3N8200 - Manual (Page 74)

5-23 ASUS T-Series M3N8200
South Bridge Configuration
SouthBridge Chipset Configuration
Hybrid SLI support [Disabled]
Primary Graphics Adapter [PCIE VGA Card Firs]
iGPU Ext-VGA Selection [Disabled iGPU if Ex]
iGPU Frame Buffer Detect [Disabled]
iGPU Frame Buffer Size [128MB]
PCIE training [Only Gen1]
SouthBridge ACPI HPEI TABLE [Enabled]
Configure System
Frequency and Voltage
Hybrid SLI support [Disabled]
Allows you to enable or disable the hybrid SLI support. Configuration options:
[Disabled] [Enabled]
Primary Graphics Adapter [PCIE VGA Card First]
Allows you to select the graphics controller to use as primary boot device.
Configuration options: [PCI VGA Card First] [Internal VGA First] [PCIE VGA Card
First]
iGPU and Ext-VGA Selection [Disabled iGPU if Ex]
Allows you to select the internal VGA or external VGA to display
Configuration options: [Disable iGPU if External VGA Card Exist] [Both Exist and
iGPU] [by Frame Buffer petect]
iGPU Frame Buffer Detect [Disabled]
Enables or disables the iGPU Frame Buffer Size Auto detect feature.
Configuration options: [Disabled] [Auto]
iGPU Frame Buffer Size [128MB]
Displays the MCP78 share memory size.
Configuration options: [32MB] [64MB] [128MB] [256MB]
PCIE training [Only Gen1]
Configuration options: [Only Gen1] [Gen2 if supported]
SouthBridge ACPI HPEI TABLE [Enabled]
Configuration options: [Disabled] [Enabled]