Installation, Preinstallation – Bell & Gossett 6 71 075 141B ecocirc wireless Potable Hot Water Recirculation Kit User Manual
Page 11
Advertising
![background image](/manuals/310219/11/background.png)
Installation
Preinstallation
CAUTION:
All work must be performed by qualified personnel trained in the proper
application, installation, and maintenance of plumbing, steam and electrical
equipment or systems in accordance with all applicable codes and regulations.
The pump and valve as received in this kit are factory paired and wirelessly
communicate water temperature and pump status with each other.
Before installation of the pump and valve, complete the following:
• Shut off water supply.
• Turn off hot water source.
• Drain the lines.
• Allow the system to cool to a safe handling temperature, below 100°F
(38°C) and a zero pressure condition.
Installation
Bell & Gossett ecocirc
®
wireless Potable Hot Water Recirculation Kit Instruction
Manual
9
Advertising