Command and response table for dsp sis commands – Extron Electronics DMP 64 User Guide User Manual
Page 111
Command and Response Table for DSP SIS Commands
Command
ASCII command
(host to device)
Response
(device to host)
Additional description
Audio Level Control, and Mix-point Selection
NOTE: The command format is the same, regardless of the control or mix-point to be set; the acceptable adjustment
range varies depending on the control or mix-point:
• The mic/line input gain range is –
18
dB to +
80
dB, in
0
.
1
dB increments.
• The pre-mixer gain range is –1
00
dB to +
12
dB, in
0
.
1
dB increments.
• The main mix-points range –
35
dB to +
25
dB, in
0
.
1
dB increments.
• The post-mixer trim range is –
12
dB to +
12
dB, in
0
.1 dB increments.
• The output volume range is –
100
dB to
0
dB, in
0
.1 dB increments.
All responses are shown with the DMP 64 in Verbose mode 2 or 3.
Set a trim or gain (excluding
mic/line inputs)
E
G
X6)
*
X6!
AU
}
DsG
X6)
*
X6!]
Set trim or mix control
X6)
to
a value of
X6!
dB.
Example 1 (pre-mixer
gain):
E
G40105*2040AU
}
DsG40105*2040
]
Set the #6 pre-mixer gain to a
value of -0.8 dB.
Example 2 (mix-point
gain):
E
G20001*2213AU
}
DsG20001*2213
]
Mix +16.5 dB of mic 1 into
output 2.
Set a mic/line gain
E
G
X6)
*
X6@
AU
}
DsG
X6)
*
X6@]
Set mic/line gain control
X6)
to a value of
X6@
dB.
Example:
E
G40001*2288AU
}
DsG40001*2288
]
Set the mic/line input 2 gain
to a level of +24.0 dB.
Set Output Volume
E
G
X6)
*
X6#
AU
}
DsG
X6)
*
X6#]
Set output volume control
X6)
to a value of
X6#
dB.
Example:
E
G
60000*1548AU
}
DsG60000*1548
]
Output 1 volume set to a level
of -50.0 dB.
Read a trim or mix
(excluding mic/line inputs)
E
G
X6)
AU
}
DsG
X6)
*
X6!]
DSP trim or mix control
X6)
is
set to a value of
X6!
dB.
Example 1
(post mixer gain control):
E
G60101AU
}
DsG60101*2103
]
Output 2, post mixer trim is
set to a value of +5.5 dB.
Example 2 (mix control):
E
G20203AU
}
DsG20203*2140
]
+9.2 dB of mic 3 is mixed into
output 4.
Read a mic/line gain
E
G
X6)
AU
}
DsG
X6)
*
X6@]
Mic/line gain control
X6)
is
set to a value of
X6@
dB.
Example:
E
G40000AU
}
DsG40000*2598
]
Mic/line input 1 gain is set to a
value of +55.0 dB.
Audio Mute
NOTES:
•
The post-mixer trim cannot be muted.
•
All responses are shown with the mixer device in Verbose mode 2 or 3.
Audio mute
E
M
X6)
*1AU
}
DsM
X6)
*1
]
Mute audio point
X6)
.
Example:
E
M20301*1A
U
}
DsM20301*1
]
Mute mix-point input 4 to
output 2.
Audio unmute
E
M
X6)
*0AU
}
DsM
X6)
*0
]
Unmute audio point
X6)
.
Read audio mute or level
E
M
X6)
AU
}
DsM
X6)
*
X6$]
NOTES:
X6)
= Audio level control, or mix-point select
See table 1 on page 111 and 112.
X6!
= Level value; mix-point or post-mixer trim
See tables 2, 3, and 4 on page 113 through 115.
X6@
= Mic/line gain level value
See table 5 on page 116 through 119.
X6#
= Level value; pre-mixer gain and output volume
See table 6 on page
120
through 123.
X6$
= Mute status
0
= unmute
1
=
mute
DMP 64 • SIS Programming and Control
105