Extron Electronics DMP 64 User Guide User Manual
Page 9
•
Group masters — The DMP 64 provides the capability to consolidate gain or mute
control throughout the system. Any gain or mute block within the Graphical User
Environment can be selected and added to a group master, which can then be
controlled by a single master fader and mute control. Each group master can have up
to 16 blocks, and up to 32 group masters can be created.
•
Soft limits — Soft limits can be applied to group master faders. Minimum and
maximum limits can be specified and controlled via RS-232 serial control.
•
Source signal presence and clipping LEDs — The DMP 64 provides indicator
LEDs on the front panel for each input and output providing real-time monitoring of
signal presence. A separate set of LEDs illuminates as a warning when signal clipping
is detected.
•
Flexible control options — The DMP 64 can be controlled using the DSP
Configurator Software and a PC connection to the IP Link Ethernet port, the RS-232
serial port, or the USB 2.0 port on the front panel.
•
Front panel USB configuration port — Enables configuration without having to
access the rear panel.
•
RS-232 serial control port — Using serial commands, the DMP 64 can be
controlled and configured via the Extron Windows
®
-based control program, or
integrated into third-party control systems using Extron Simple Instruction Set (SIS
™
)
commands. With two RS-232 serial ports plus the IP Link Ethernet port, the DMP 64
offers possibilities for control in single and divisible room applications.
•
Two RS-232 ports — The DMP 64 is equipped with both primary and secondary
RS-232 serial ports for divided room applications.
•
IP Link
®
Ethernet monitoring and control — Engineered to meet the needs
of professional A/V environments, IP Link enables the DMP 64 to be proactively
monitored and managed over a LAN, WAN, or the Internet, using standard TCP/IP
protocols.
•
Versatile mounting options — Rack-mountable 1U, half rack width metal
enclosure.
•
Universal power supply — The 100-240 VAC, 50-60 Hz, international power supply
provides worldwide power compatibility.
DMP 64 • Introduction
3