Extron Electronics MTP SW6 User Guide - Manual (Page 26)

Timeout
Pauses of 10 seconds or longer between command ASCII characters result in a timeout.
The command operation is aborted with no other indication.
Using the Command/Response Table
The command/response table begins on page 23. Lower case letters are acceptable in
the command field except where indicated for the audio level (gain and attenuation)
commands. Symbols are used throughout the table to represent variables in the
command/response fields. Command and response examples are shown throughout the
table. The ASCII to HEX conversion table below is for use with the command/response
table.
ASCII to HEX Conversion Table
Space
MTP SW6 • Remote Control 22