Extron Electronics MTP SW6 User Guide - Manual (Page 30)

Windows-Based Program Control
The Windows-based Extron Universal Switcher Control Program, which communicates
with the switcher via the Remote port, provides an easy way to configure and operate the
MTP SW6 switcher. The program is compatible with Windows 2000 and Windows XP or
higher versions.
Installing the Software
The program is contained on the Extron Software Products DVD. Install the software as
follows:
1. Insert the disk into the drive. The Extron software DVD window should appear
automatically (figure 14).
Figure 14. Software CD window
NOTE: If the window does not self-start, run Launch.exe from the DVD.
2. Click the Software tab (figure 14).
3. Scroll to the desired program and click Install (figure 15).
Figure 15. Software installation
4. Follow the on-screen instructions. By default, the installation of the Universal
Switchers Control Program creates a C:\Program Files\Extron\UniversalSwitcher folder,
and it places four icons into a group folder named “Extron Electronics\Universal
Switcher.” The four installed icons are:
о Check for Universal Switcher Updates
о Uninstall Universal Switcher
о Universal Switcher Control Program
о Universal Switcher Help
MTP SW6 • Remote Control 26