Extron Electronics PVS 405D User Guide - Manual (Page 39)

Figure 15. New Device Page in Emulate/Offline Mode
Using the PVS 405D Product Configuration Software — Menus
NOTE: For detailed software navigation open the PVS 405D Product Configuration
Software Help file.
There are two main menus shown at the top of the window.
These are Connections and Tools.
Connections Menu
This menu has five options: Connect, Disconnect, Save Device, Load
Different Config File to this Device, and Exit Application.
Connect
This allows the user to connect to the device that is
already set up in emulation mode on the
configuration page. The page goes from emulation
mode to live mode and shows the connected
devices’ current configuration settings. The tab
indicator changes from gray (not connected) to
green (connected).
NOTE: If a device is already connected, the Connect option is disabled until the
device is disconnected or the connection times out.
Disconnect
This allows the user to disconnect from the connected device and return to emulation
mode.
PVS 405D • Using Extron Product Configuration Software 33