Extron Electronics PVS 405D User Guide - Manual (Page 49)

3. Enter a name for the device. The name may be up to 24 alphanumeric characters in
length.
4. Click Apply.
To reset the name of the device, click Reset to Default. The default name is the model
name followed by the last six digits of the device MAC address (see image above).
Executive/Power Mode Page
This page allows the user to set the executive mode and power mode for the device.
Click on this button to open the page.
Figure 26. Executive/Power Mode Page
Executive Mode
Executive mode locks the front panel functions of the PVS 405D, and there are two
executive mode options available:
•
Unlock Front Panel (default)
•
Lock Front Panel
To set executive mode:
1. Click the radio button for the desired lockout mode.
2. Click Apply.
Auto Power Save Mode
When on is selected, the auto power save mode turns off the power amplifier when audio
is not detected for 25 consecutive minutes. Default is auto power save mode off
To set the power mode:
1. Click the radio button for the desired auto power save mode (Off or On).
2. Click Apply.
PVS 405D • Using Extron Product Configuration Software 43