Extron Electronics TPS150 User Guide - Manual (Page 28)

Operation, cont’d
TPS150 Switching and Transmission System • Operation 3-8
Specific problems
The table below shows some common operating problems and their solutions.
Problem Possible cause Solution
No image appears. System is not receiving Ensure that the video source, the
power.
transmitter and receiver, and the
display are plugged into a live AC
power source and the transmitter
is turned on.
No video input Check that the input device is
sending a video signal to the
transmitter.
No video output Select a different input. If a screen
display does not appear, check the
output connection.
The projector has the On the projector, manually check
wrong input/signal that the input and format are
format selected. correct. If not, check that the
proper signal string for the input
selection is programmed into the
transmitter.
Video may be muted. Press the transmitter’s Blank
button to disable video mute.
Distorted image Improperly adjusted Follow the steps in “Optimizing
appears. receiver the Video” on page 3-6.