Extron Electronics TPS150 User Guide - Manual (Page 45)

4-17 TPS150 Switching and Transmission System • Serial Communications
Command/response table for programming and operating the TPT150 (Cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Front panel lockout
Disable front panel [FP0] [R0• X1 •FP0•] Disable the transmitter’s buttons.
Enable front panel (default) [FP1] [R0• X1 •FP1•] Enable transmitter’s buttons.
Toggle front panel lockout [FP] [R0• X1 •FP•] Toggle front panel status
(enabled-to-disabled or disabled-
to-enabled).
View front panel lockout [FP?] [R0• X1 •FP?• X3 ] 0 = front panel off, 1 = on.
Transmitter reset
Reset transmitter [DFLT X16 ] {none} 0 = reset serial port settings and
addresses without deleting input
button codes, projector power
codes, input audio level, and
volume.
1 = factory reset, including input
codes, projector power codes,
input audio levels, and volume
level.
Architectural information
View architectural information [ARC] [R0• X1 •ARC• X17 ] Display the transmitter model,
revision, and connection
information.