Extron Electronics TPS150 User Guide - Manual (Page 48)

TPS150 Switching and Transmission System • Reference Information A-2
Reference Information
Specifications
Video
Gain ................................................ Unity
Crosstalk ....................................... -42 dB @ 10 MHz
Number/signal type ................... 1 set of proprietary analog signals
Connectors ................................... 1 RJ-45 female jack
Video input
Number/signal type
TPT150 ............................... 1 VGA-UXGA RGBHV with 1 RGB buffered local monitor loop-through
1 VGA-UXGA RGBHV
2 component video (Y, R-Y, B-Y), or S-video, or composite video
TPR150 ............................... 1 set of proprietary analog signals from a TPT150
Connectors
TPT150 ............................... 2 female 15-pin HD (RGB input)
1 female 15-pin HD (RGB loop-through)
2 sets of [3 female RCA (component video), 1 female RCA (composite),
1 female 4-pin mini DIN (S-video)]
TPR150 ............................... 1 female RJ-45 jack
Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ....... Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance .................................... 75 ohms
Return loss .................................... <-40 dB @ 5 MHz
DC offset (max. allowable) ......... ±50 mV
Video output
Number/signal type
TPT150 ............................... 1 set of proprietary analog signals
TPR150 ............................... 1 RGBHV
1 component video (Y, R-Y, B-Y)
1 S-video
1 composite video
Connectors
TPT150 ............................... 1 female RJ-45 jack
TPR150 ............................... 1 female 15-pin HD (RGB)
3 female RCA (component video)
1 female 4-pin mini DIN (S-video)
1 female RCA (composite video)
Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
± 0.1 Vp-p with 50' of TP cable between the TPT150 and TPR150
Minimum/maximum levels ....... 0.24 V to 1.5 Vp-p
Impedance .................................... 75 ohms
Return loss .................................... -22 dB @ 5 MHz
DC offset ....................................... ±30 mV with input at 0 offset