ABUS TVIP31550 User Manual

Page 103

Advertising
background image

103

6.2 Camera


General

RTSP:

Settings for RTSP transmission.

RTSP port:

The standard port for RTSP transmission is 554. Alternatively, this port can have a
value of 1024-65535. If several IP cameras are located in the same subnetwork, then
each camera should have their own unique RTSP port.


RTP:

Settings for the RTP transmission (Real Time Protocol).

Unicast streaming: When using Unicast streaming, the video files are transmitted to a recipient who

requested the data.

Port range:

The standard port range for RTP Unicast streaming is 5000-7999. Alternatively, the
port range can have a value of 1027-65535.


Image rotated:

Settings for image orientation.


Flip:

The image is rotated by 180°.

Mirror:

The image is mirrored.

Flip + mirror:

Select this option when the camera has been installed upside down.



Video clip format:

Select between MPEG-4 and H.264 for the compression type of the saved video clips
(e.g. e-mail SMTP video clip transmission). The H.264 option can result in the
utilisation of more system resources, which can lead to a reduction in camera
performance (e.g. frame rate and motion detection).


Analogue
video output:

Activate or deactivate the analogue video output on the camera. This video output is
used for setting the focus.

The MPEG-4 function is not available and cannot be configured if the analogue
video output is activated under “Camera/General” (no integration into NVR/HDR
possible!).


Night ICR mode:

Settings for the swivelling IR cut filter (ICR)
Auto: The cut filter pans in or out automatically according to the light sensor. The
“Threshold” option specifies the switching values.
Night mode: The swivel filter is constantly separated from the image sensor. The image
sensor can record visible light and IR light.
Day mode: The swivel filter is constantly in front of the image sensor. The image
sensor can only record visible light.
Schedule: The swivel filter is switched according to a schedule. The “ICR schedule”
option appears (see 6.14, “Schedule” for details on configuration).


Advertising
This manual is related to the following products: