ABUS TVIP31550 - Manual (Page 110)

110
Progress bar
Progress bar for playback. Click on the bar to jump to a specific point in the video.
Digital zoom
The digital zoom can be activated here. The zoom area can be changed in the video image. The zoom factor
can be changed using the “W” (wide angle) and “T” (tele-zoom) buttons.
Mirror / flip
Mirrors or flips (180° rotation) the video image.
Snapshot
An individual video image can be displayed and saved here.
Full-screen
The full-screen video image is displayed.
6.3 Network
Information
MAC address:
The hardware address of the camera is displayed here.
Obtain an IP address automatically (DHCP): The IP address, subnet mask and address for the default
gateway are obtained automatically from a DHCP server. An
activated DHCP server must be present in the network in this
case.
Use the following IP address: Manual setting of the IP address, subnet mask and default gateway.
IP address: Manual setting of the IP address for the IP camera.
Subnet mask: Manual setting of the subnet mask for the IP camera.
Default gateway: Manual setting of the default gateway for the IP camera.
Use the following DNS server address:
If the DNS server address is not assigned automatically by
a DHCP server, then it can be entered here manually.
Primary DNS server: First server address used where the camera attempts to
convert the DNS names into IP addresses.
Secondary DNS server: Alternative server address used where the camera attempts
to convert the DNS names into IP addresses.
HTTP port number:
The standard port for HTTP transmission is 80. Alternatively, this
port can have a value of 1024-65535. If several IP cameras are
located in the same subnetwork, then each camera should have
their own unique HTTP port.