ABUS TVIP31550 User Manual
Page 129
129
The settings can be tested using the “Test” button. Accept the settings by
pressing “OK” or cancel them by pressing “Cancel”.
Alarm sending
Alarm sending:
Activates or deactivates the storage of image data (snapshots) on a network
drive after an event.
Image file name:
Assign a file name for image data storage here. A maximum of 10 letters or
digits are permitted. “_” and “-” can also be used as characters.
Suffix:
The file attachment suffix can be a date and time or a sequence number.
Delete sequence number:
Resets the sequence number to 1.
Alarm:
Select the event which triggers the storage procedure on the network drive.
Motion detection:
All set activity masks.
Network link down:
Limited network connections. The configured alarm buffer can be used (see the
“Alarm buffer” section).
Alarm input:
The activated digital input can represent the trigger.
Recording time:
Select the recording time on a network drive following an event (5-60 seconds).
Effective Period
Always:
The detectors for these alarms are permanently activated.
Schedule:
The detectors for these alarms are activated at defined schedules. Press the
“Schedule” button to configure these settings (see also the “Schedule” section).
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.
Periodical recording
Periodical recording:
Define the settings for continuous recording to a network drive here. The
recording time can be defined using a schedule.
Image file name:
Specify the file name for the image file here.
Suffix:
Select the file suffix here. This can be the date and time or a sequence
number.
Delete sequence number:
Resets the sequence number to 1.
File size:
Indicates the maximum file size (max. 50 MB).